// MultiSound Pinnacle initialzation file for use with LAUD
// COPY THIS FILE TO YOUR C:\LAUD DIRECTORY AFTER EDITING
// THE THREE VALUES INDICATED
// set IOAddress below to match your jumper setting (250,260, or 270)
[ConfigControl]
IOAddress0=260

// Logical Device 0 - DSP
// Resources for Digital Audio device
// Set the IOAddress0 and RAMAddress below to match your installation
//  (only these two sections are used by LAUD; ignore the others)
// NOTE THAT THERE ARE ONLY 4 characters used in the RAMAddress!
[LogicalDevice0]
Active=1
IOAddress0=290
IOAddress1=0
IRQNumber=11
RAMAddress=D000